VHF Wireless
Receivers.

GALLERY

Click thumbnail to enlarge

RX16
16 Zone Wireless Receiver

The RX16 RECEIVER allows you to place wireless PIR detectors (TX500) exactly where you want them without having to run cables or compromise on position.

The RX16 receiver allows you to place wireless PIR detectors (TX500) exactly where you want them without having to run cables or compromise on position.Complete with one 4 zone module as standard, this receiver may be expanded up to 16 zones by adding a further three 4 zone modules (PC4). Alarm outputs are provided in the form of reed relay contacts and may be set to N/C or N/O. These contacts are common to ground. The supplied internal aerial provides good reception range, but for optimum range an optional high performance aerial (AE173) is available. The aerial may be placed up to 30m away from the RX16 by using the EX173 aerial adapter.

RX16DC
16 Zone Wireless Receiver

The RX16DC receiver has the same features as the standard RX16 but with a two stage high sensitivity receiver module which when used with an AE173 aerial can give a range of up to 1Km.

Complete with one 4 zone module as standard, this receiver may be expanded up to 16 zones by adding a further three 4 zone modules (PC4). Alarm outputs are provided in the form of reed relay contacts and may be set to N/C or N/O. These contacts are common to ground. The supplied internal aerial provides good reception range, but for optimum range an optional high performance aerial (AE173) is available. The aerial may be placed up to 30m away from the RX16 by using the EX173 aerial adapter.

RX300
240 volt Wireless Receiver
for Lighting Control

This weatherproof single zone receiver/control unit is ideal for small wireless installations where any number of TX500 PIR detectors are to activate one lighting system.

The RX300 can be mounted internally or externally and wired directly to the lighting circuit. The on board timer holds the lights ON for up to 4 minutes after the last detected movement. The lights can be turned on manually with a separate over-ride switch.

RX400
Single Zone Wireless Receiver

The RX400 is a single zone receiver for the TX500 wireless PIR detectors.

The N/C (normally closed) volt free relay contacts can interface with many types of alarm system as well as the DX100 lighting control unit. Other uses include CCTV interface and other types of external alarm systems.

FEATURES AND SPECIFICATIONS

  RX16 RX16DC RX300 RX400
Receiver frequency 173.225Mhz
Reception range 150m max line of sight (with AE173) 1km max line of sight (with AE173)    
Aerial connection       Coaxial 50 ohms solderless may be extended
Aerial Integral Helical Integral Helical Detachable ¼ wave Detachable ¼ wave
Site codes 32 32 32  
Unit codes 16 16 1 (Single zone)  
Contact duration 2 Seconds 2 Seconds   2 seconds
Contact rating       30V 1amp Max.
Single Zone output       Normally closed reed relay output for connection to a DX100 or Alarm System
Timer     Variable from 4 seconds to 4 minutes  
Operating voltage 12V DC 12V DC 220–240VAC 50Hz 12V DC
Power     1kw relay  
Power consumption Max 180m/a Max 180m/a   12m/a
Temperature range -10 to +50°C -10 to +60°C -10 to +60°C  
Weather rating IP66 IP66 IP65 IP55 (Not for external Use)
Enclosure Grey ABS plastic housing

MAXIMUM LOADS

Resistive 10A 240VAC
Incandescent 1000W
Halogen lamps 500W
LV halogen lamps 200W
Fluorescent lamps 150W (uncompensated)
LED lamp 150W
Energy saving lamps 6 x 18W, 4 x 36W, 2 x 59W
Discharge lamps A suitable contactor is recommended