The TX500 WIRELESS DETECTORS are battery operated (PP 3 type) and have the same appearance as their GX200 hard wired low voltage counterparts.
This VHF wireless PIR detector has a transmission range of up to 1Km line of sight if used with an RX16DC receiver and AE173 aerial.
Day time operation can be inhibited if required.
Compatible receivers are:
RXB plug in bleeper with built in receiver.
RX300 lighting control unit with built in receiver.
RX400 receiver for use with DX100 lighting control unit.
RX16 CCTV interface receiver with up to 16 outputs.
RX16DC High sensitivity version of the RX16.
The TX500 has been DTI approved and is license exempt.
For use in UK only.
SPECIFICATION:
Housing:
Durable ABS UV stabilised housing
Fully Weatherproof
Three different lens options are available.
15 metres lens:
TX500/15 Standard 15 metre 90':
Mounting height approximately 2-2.5 metres high.
Average coverage 15 metres * 90'.
40 metres lens:
TX500/40 Standard 40 metre 1':
Mounting height approximately 2-2.5 metres high.
Average coverage 40 metres * 1'.
Curtain lens:
TX500/CL Curtain 12 metre 100':
Can be fixed under eaves for 100' coerage against a wall or fixed at 1 metre appoximately (horizontally) which helps avoid detection of small animals.
Power Supply: - 9 Volts battery (PP3) type. Use long life type.
Battery Life: - Approximately 12 months depending on situation
Transmitter Power: - 10 m/w with long areal supplied.
Transmitter Frequency: - 173.225 MHz (Crystal Controlled)
Modulation: - Pulse Modulation
Range: - Line-of-sight between aerials without obstruction up to 100 metres when used with the RXB, RX300, RX400 and RX16 standard. 1000 metres plus is achievable when used with the RX16DC receiver.
Site Codes: - 32
Unit Codes - 16 Use these with the RX16 receiver
Dimensions: - H145mm W100mm D155mm
Tested to: - MPT 1344
|
