GALLERY
Click thumbnail to enlarge
OVERVIEW
The DX100 is a single zone lighting control unit for use with the RX400 receiver and TX500 wireless PIR detectors.
The lighting control unit has a high power switching relay for various lighting loads. It works in conjunction with GX200 wired low voltage external PIR detectors. Adding an RX400 wireless receiver to the system enables TX500 wireless PIR detectors to be used in addition or instead of GX200's. The DX100 is mains powered and provides the 12 volts DC for the PIR detectors and/or radio receiver. Up to six GX200 detectors may be used with one control unit and are wired using low cost four core alarm cable up to a maximum length of 100 metres.
FEATURES AND SPECIFICATIONS
| Supply | 220–240VAC 50Hz |
| Output | 12V DC 300m/a |
| Max number of detectors | 6 |
| Type of cable | 4 core 7/02 alarm or telephone cable |
| Max cable length | 100 metres |
| Siting | For internal or external mounting |
| Time setting | Adjustable 5 seconds to 15 minutes |
| Dusk/dawn | Adjustable |
| Power switching | 3KW resistive with 16 amp relay |
| Temperature range | -10 to +60°C |
| Weather rating | IP66 |
| Enclosure | Grey ABS plastic housing |
MAXIMUM LOADS
| Resistive | 16A 240VAC |
| Incandescent | 3000W |
| Halogen lamps | 1500W |
| LV halogen lamps | 600W |
| Fluorescent lamps | 450W (uncompensated) |
| LED lamp | 450W |
| Energy saving lamps | 300W (including CFL & PL) |
| Discharge lamps | A suitable contactor is recommended |
DOWNLOADS
Click link to download
